Install Papercut printer on Windows with BitDefender

BitDefender pode apagar impressoras do Papercut em um rede publica

Antes de ir embora :)
Não esqueça de indicar se este artigo foi útil (resolveu) ou não, esta no final deste texto. Assim, ajuda a chegar a mais pessoas, e apurar nossas soluções.

Problema BitDefender + Papercut printers
Após instalar impressoras via Papercut, o Windows não mostra a impressora.

Customers using BitDefender should watch out for a specific feature that interferes with Mobility installer print queue creation. The Dynamic Mode feature changes the BitDefender filter’s aggressiveness depending on the network adapter’s connection profile status. In other words, BitDefender might delete print queues if your network adapter connection profile is Public. To resolve a “Dynamic Mode” issue, you can change the client’s connection profile from Public to Private.


Solução
Configurar no BitDefender a rede em uso como Home/Office:
  1.  Open the main BitDefender interface.
  2.  Go to the Protection window.
  3.  In the FIREWALL module, click the Settings button.
  4.  Go to the NETWORK ADAPTERS tab. Click the box corresponding to your network adapter and select Home/Office.
  5.  Go to the SETTINGS tab.
  6.  Click Edit stealth settings.
  7.  Set the switch corresponding to your network adapter to Off (grey switch). After that, click OK
  8.  Now go to the RULES tab and click Add rule.
  9. . In the upper part of the window, set the switch to YES, to Apply this rule to all applications.
  10.  Go to the Advanced tab.
  11.  Next to Custom Remote address, set the switch to On. Then, under it, type the IP of the device you want to connect to in its corresponding field.
  12.  Click OK.
    NOTE: You can also specify the port for which the rule will be available. If you do not specify the port, the rule will apply to all ports.